- DESC
- SPECS
- INCENTIVES
- SIZE
- COMPATIBILITY
-
Tyler Chaffin has been riding pro for Fuzion for quite some time now and has sported a number of signature parts over the years. His all new sig deck features the all too familiar space man graphics – this time sports a cool black/white graphic with the space shuttle hurtling through space.
The Fuzion Entropy Deck is a pro scooter deck that Fuzion created for Tyler Chaffin, who rides pro in pro scooter competitions for Fuzion scooters. The Fuzion Entropy Deck is 5″ wide by 20.5″ long, with an 83 degree headtube angle. Headtube angle affects a couple of things. The steep rake of the Fuzion Deck makes it perfect for those riders who have mastered the single tail whip and are moving onto multiple whips. The steeper the headtube angle, the more the Entropy Deck whips around a flat plane with less resistance. Because the deck does not have boxed ends, we consider the Fuzion Scooter Deck to be a park deck but it’s equally at home at the skatepark or in your hood. PRO SCOOTER DECKS that are 20-20.99″ long will be ideal for intermediate to pro riders that have been in the sport for a while or for those scooter riders that need a little more footspace. The Fuzion Entropy Scooter Deck works with the following wheel diameters: 100mm,110mm,115mm,120mm and the following wheel widths: 24mm. Note that decks typically come standard with 24mm spacers. If you change the wheel core width, you will also need to change your spacers to accomodate the new wheel core width.
-
Fuzion Entropy Deck V2 – Tyler Chaffin Signature Specifications
- Weight – 2.67 lbs
- Material – Aluminum
- Length – 20.5″
- Width – 5″
- Foot Space – 15″
- Headtube Angle – 83
- Axle size Compatibility – 8mm ONLY
- Wheel Diameter Compatibility – 100mm, 110mm,115mm,120mm
- Peg Compatibility – Front YES, Back WITH SPACERS, YES
- Headtube cut-out – YES
- Griptape included – NO
- Hardware/Brake included – YES, (Vertical 2 bolt pattern, Bottom mount brake)
- Available colors: BLACK/WHITE
-
– TEMPORARY SALE PRICING IN EFFECT THRU 7/26/2022 – 15% OFF RETAIL!
– SAME DAY SHIPPING (when ordered by 2pm CST)
-

-
Pro scooter decks are compatible with wheels, grip tape, and headsets.
HEADSETS
Headsets contain the bearings that sit in your scooter deck upper and lower headtube cups, which allow your forks and bars to spin in unison. There are two types of headsets – integrated and standard. Very few scooters these days are made with standard headsets. In fact, we don’t even sell them since every deck on our site is an integrated deck. On our site, all headsets work with all decks since they are all integrated. On other sites, verify that your headset and deck are either both standard or both integrated.
GRIP TAPE
Decks vary vastly in size so, if you are purchasing grip tape, make sure that it is approximately the same size as your deck. Larger sheets of grip tape may have to be cut down to fit your deck, while smaller sheets may not fit a larger deck. In other words, we don’t recommend buying smaller sheets of grip tape for a large deck. You can always buy a large sheet of grip tape for a smaller deck but it may require cutting to get it to fit properly.
WHEELS
There are three things to know about wheels as it relates to scooter decks. (1) The wheel outer diameter must be compatible with the wheel diameter of the deck. (2) The wheel width must be compatible with the deck spacers that come on the rear axle of your deck (and forks). (3) Rules 1 and 2 also apply to your forks. In other words, if you are running 120mm diameter wheels with a 30mm width, both your deck and forks must be able to accommodate 120×30 wheels. It’s wise to check wheel compatibility on any deck that you want to purchase, but most decks and forks are designed to work with conventional 110×24 or 120×24 wheels. When running an unconventional size wheel (120×30,110×30,115×28,etc), please double check the wheel compatibility of your deck and forks.














Reviews
There are no reviews yet.