Tilt Stage 1 SCS Clamp – Selects I.Shack
Original price was: $69.95.$51.06Current price is: $51.06.
- No-Questions-Asked Returns
- Free Shipping, No Compromise on Quality
- Experience the difference quality makes.
- Safe Shopping Guaranteed
- DESC
- SPECS
- INCENTIVES
- COMPATIBILITY
- The Selects i.Shack rendition of the Stage I SCS gives ode to the legend himself – Issac Miller. Based on his original Signature Fork and SCS from Tilt but with added side effects including going full-send and tearing up street jams. Limited to a production of 500. The Stage I SCS brings you the same features and strength as Tilt’s higher end clamps in a simplified design. This Selects version features additional internally lightened, and like all Tilt SCS clamps, custom bolts with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep your bars in place and compression tight. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent the bolts from seizing to the clamp. This clamp will have you joining the ranks of thousands of riders who trust Tilt SCS. The Tilt SCS is a SCS compression system. The Tilt SCS clamp is a full size SCS because it is slightly larger than a baby SCS but provides maximum clamping power. The Tilt SCS only works with SCS bars without a slit. While SCS compression is more expensive than other compression systems, it is the most effective compression system you can put on a pro scooter. The Tilt SCS clamp includes a shim and works with both oversized and standard outer diameter PRO SCOOTER BARS without a slit. The Tilt I Shack SCS includes M8 bolts for maximum clamping power. M8 bolts are much less likely to strip than M6 bolts. It is a good practice with any compression bolt to tighten each bolt 1/2 turn at a time, one bolt at a time, until all bolts are completely tight. The Tilt SCS works with the SCS compression ONLY.
-
Tilt Stage 1 SCS Clamp – Selects I.Shack Specifications
- Weight: 8.8oz incl hardware
- Material: Forged and anodized 6061-T6 aluminum
- Height: 3.0 inches
- Hardware: Pregreased custom bolts
- Handlebars: Standard and oversized
- Shim: 38.1mm Height
- Clamp & Compression Bolts: M8
- Compression Washer: M8
- Available colors: GREY
-
– % DISCOUNT APPLIED AT CHECKOUT!
– SAME DAY SHIPPING (when ordered by 2pm CST)
-
Scooter compression is the single most important concept to understand when building a scooter. Your compression system drives which parts you will need to purchase in order to complete your scooter. Contrary to popular belief, not all scooter parts are compatible with each other. In fact, most of them are not.
SCS COMPRESSION
SCS compression is the most effective compression on the market. The downsides are cost and weight but, if you want to keep your scooter dialed without ever having to tighten your clamp, SCS is the way to go. When running SCS compression, you will need bars without a slit. Most SCS’s come with a shim so they will work with either diameter. However, if your SCS doesn’t come with a shim, ensure that the diameter of the SCS works with the diameter of your bars. SCS compression will also require the use of SCS forks.
HIC COMPRESSION
HIC compression is a popular option among pro riders. While it is not quite as effective as SCS, it costs a lot less and is a popular option for those riders who want the lightest setup. If you are running HIC compression, you will need an HIC kit, oversized bars without a slit, and an oversized double clamp (or a clamp with a shim).
IHC COMPRESSION
IHC compression has become one of the more popular types of compression, as the compression system is built directly into the forks. That means that you just need compatible bars and clamp. Pick up a clamp with a shim, which will work with either oversized or standard bars. You can run either oversized or standard diameter bars with IHC forks as long as they have a slit. But the steel bars need to have an oversized inner and outer diameter. Aluminum bars just need to have a slit .
| SELECT COLOR | GREY |
|---|
Be the first to review “Tilt Stage 1 SCS Clamp – Selects I.Shack”
Related products
AZTEK PRO SCOOTERS
AZTEK PRO SCOOTERS
AZTEK PRO SCOOTERS
Reviews
There are no reviews yet.